Cost Evaluation of Different Medium Solids for Air Dense Medium Fluidized Bed Coal Separation
University laboratory work on air fluidised bed separation, testing pyrrhotite, blast furnace slag, silica sand and coal discards against magnetite, for engineers considering waterless coal washing.
Magnetite and pyrrhotite each gave the most uniform and stable fluidised bed densities, with bed density variation under 0.7 per cent. A pyrrhotite and magnetite blend at a weight ratio of 40:60 beat magnetite alone, producing a product of 14.50% ash and 27.30 MJ/kg from a feed of 39.27% ash and 18.76 MJ/kg.
R1500,00
Description
Related Products
DyVar Pilot Test Report
2019
Batch pilot trial of a salt concentration unit on saline coal mine effluent at the eMalahleni reclamation plant, for mines weighing brine treatment and salt recovery.
What this report foundA pilot brine concentrator treated Stage 3 reject effluent from a mine water reclamation plant, raising total dissolved solids from 24 g/L to 154 g/L at 88 per...
R1500,00
A pilot brine concentrator treated Stage 3 reject effluent from a mine water reclamation plant, raising total dissolved solids from 24 g/L to 154 g/L at 88 per cent water recovery. The condensate met the national potable water specification. A separate run concentrated brine from 76 g/L to 145 g/L, solid salts were precipitated, and no scaling or fouling was seen.
Developing a Mechanised Cleaning System – for Cleaning Under and Around Moving Conveyors
2013
Follow on review of mechanised conveyor cleaning equipment close to being usable underground, flameproof and not, written to help the coal industry agree which options to develop.
What this report foundNo flameproof mechanised system for cleaning under and around moving conveyors was found to exist anywhere.
R1500,00
No flameproof mechanised system for cleaning under and around moving conveyors was found to exist anywhere. Of more than 200 mini machinery manufacturers identified worldwide, few build for mining, and only one or two products were near ready for surface use. Manufacturer interest in mining applications has since risen, but the industry has not settled on which technology to back.
Detection of Old Workings, Sinkholes, Underground Fires and Acid Mine Pollution Using Geophysics and Airborne Thermal Infrared Imagery
2002
Field trials at four collieries comparing ground and airborne geophysical methods, with case studies and an applications guideline for the Witbank and Highveld collieries.
What this report foundMicro-gravity, electrical resistivity and time domain electromagnetics located the boundary between old workings and virgin ground, but no ground technique...
R1500,00
Micro-gravity, electrical resistivity and time domain electromagnetics located the boundary between old workings and virgin ground, but no ground technique tested could resolve individual bords and pillars at the depths typical of the Witbank and Highveld coalfields. Airborne thermal infrared surveys worked well as a low cost regional reconnaissance tool for shallow sinkholes, fires and possible pollution plumes.
Fine Coal Dense-medium Cyclone Tests Conducted at Leeuwpan Coal Mine
2007
Pilot dense medium cyclone testing on fine coal inside a working spiral plant at a Mpumalanga opencast mine, ending in a full scale plant design.
What this report foundDense medium cyclones on the fine coal fraction lifted product yield well above the spiral circuit they were compared against and gave closer control of...
R1500,00
200720 pages
Dense medium cyclones on the fine coal fraction lifted product yield well above the spiral circuit they were compared against and gave closer control of product quality. Cut point density control proved the hardest part of running the plant, medium properties being critical. Magnetic separator capacity had to match the duty, and a basement was needed to contain and recover medium spillage.