R1500,00
Description
Related Products
Recovery of Rare Earth Elements by J Nkuna.pdf
Flotation, calcination and leaching tests on run of mine and discard coal, with mineralogy of the rare earth bearing grains. For processing researchers and waste stream owners.
What this report foundRun of mine and discard coal carried total rare earth contents of 260 and 265 ppm, above the 130 ppm cut off grade used for coal.
R1500,00
Run of mine and discard coal carried total rare earth contents of 260 and 265 ppm, above the 130 ppm cut off grade used for coal. Flotation with an emulsion binder did not raise those concentrations in either the product or the tailings streams. Calcination did, lifting totals to between 285 and 289 ppm, with most rare earths leaching within the first fifteen minutes.
Detection of Old Workings
2008
Review of earlier geophysical work plus literature, setting out method selection and test site requirements ahead of field trials, for engineers assessing undermined ground before development.
What this report foundMicrogravity, resistivity based methods including self potential, and time domain electromagnetics are identified as able to detect and delineate shallow old...
R1500,00
Microgravity, resistivity based methods including self potential, and time domain electromagnetics are identified as able to detect and delineate shallow old workings, with controlled source audio magnetotellurics useful below about 30 metres. How well each performs depends on target depth, the material filling the void and the overburden, and has never been quantified. Field trials were planned to close that gap.
Unlocking obstacles to the commercialisation of eutectic freeze crystallisation
2022
Laboratory crystallisation cell tests on copper, brass, stainless steel and aluminium cooling plates in sodium sulphate solution, aimed at replacing mechanical scraping in brine treatment plants.
What this report foundHeat exchanger material governs how fast ice scale forms during eutectic freeze crystallisation of dilute brine.
R1500,00
Heat exchanger material governs how fast ice scale forms during eutectic freeze crystallisation of dilute brine. Induction time fell as thermal conductivity rose, so copper scaled first, while aluminium gave the lowest scaling rate because its low surface energy pushed ice crystallisation into the bulk. Stainless steel delayed onset but scaled heavily once nucleation started.