FGX Dry Processing Tests Conducted at Exxaro R&D
200931 pages
Pilot tests of a waterless de-stoning unit on raw coals from four South African collieries at a Pretoria research site, for plant metallurgists weighing dry beneficiation.
A compound dry cleaning machine de-stoned low grade raw coal without using water, but separation efficiency was low, with high relative density cut points and EPM values in the order of 0.3. Misplaced material was heavy and coal below 6 mm reported to product almost indiscriminately. The unit is cheap to buy and run, needs only crushing to 50 mm, and gives high throughput.
Contents
- Introduction4
- The FGX Compound Dry Cleaning Machine5
- FGX tests conducted at Exxaro R&D8
- Results obtained10
- Matla Coal10
- Sasol Coal17
- Anglo Coal21
- Leeuwpan Coal23
- Discussion of results25
- Conclusion29
How it opens
With the kind co-operation of Exxaro, a series of tests was conducted on a FGX compound dry cleaning machine at the Exxaro R&D site in Pretoria West. The purpose of the tests was to evaluate the potential of the FGX towards dry de-stoning of low-grade raw coals.
How it concludes
R1500,00
Description
Related Products
Application of EARTH Ion Exchange Technology to Process RO (Hipro) Brine from eWRP
2010
Pilot trial on brine from a working water reclamation plant on the Mpumalanga coalfield, the first of four studies testing ion exchange on coal mine liquors.
What this report foundIon exchange applied to brine from a three stage reverse osmosis plant at eMalahleni converted the brine entirely into saleable fertiliser and explosives...
R1500,00
Ion exchange applied to brine from a three stage reverse osmosis plant at eMalahleni converted the brine entirely into saleable fertiliser and explosives feedstock, and recovered close to half of the water the reverse osmosis stage leaves behind. On this basis the existing brine pond and the two planned for the plant expansion would not be needed.
Can old bord-and-pillar workings be mapped from surface?
2016
Desktop review updating two earlier assessments, weighing borehole scanning, robots and unmanned aerial platforms as routes to locating old workings ahead of opencast drilling and blasting.
What this report foundNo surface geophysical method can map individual bords and pillars at the depths typical of the Witbank coalfield, a limit the review attributed to physics...
R1500,00
No surface geophysical method can map individual bords and pillars at the depths typical of the Witbank coalfield, a limit the review attributed to physics rather than to technology, since the targets are small relative to their depth and conductive layers often lie above the seam. Borehole laser scanning remains the workable option, with sonar suited to flooded workings.
Intra-seam Sedimentological Controls on Coal Quality: 2 Seam, Witbank Coalfield
2003
Sub-seam mapping at an opencast colliery in the Witbank area, setting out a method geologists and resource estimators can apply to other seams.
What this report foundSub-seams within the No 2 Seam were characterised at a single test site using lithology, seam thickness, proximate analysis, petrography and geophysical logs...
R1500,00
Sub-seams within the No 2 Seam were characterised at a single test site using lithology, seam thickness, proximate analysis, petrography and geophysical logs, and a paleoenvironmental model was built from them. Wireline logs separated coal from interburden but could not resolve the individual zones, because the physical differences are too subtle. Better sedimentological models gave better reserve and resource estimates.