Evaluate the Remaining Resources of Low Phosphorus Coal in Mpumalanga Province
Assessment of remaining metallurgical grade coal in the Witbank, Highveld and Ermelo coalfields from national borehole records, for resource planners and buyers of reductant coal.
by D.S. Xaba | October 2004
Tonnage estimates for the remaining low phosphorus resource could not be produced, because the phosphorus analyses supplied by mining companies did not state what had been measured. Distribution trends were still mapped. Coal at or below 0.010 per cent phosphorus is widespread in the Witbank Coalfield, restricted to the far northwestern Highveld, and follows a northwest to southeast band in eastern Ermelo.
R1500,00
Description
Related Products
Develop Methods to Prevent and Control Spontaneous Combustion Associated With Mining and Subsidence
2003
Fourth year of work at South African collieries, using borehole and infrared temperature monitoring, moisture testing and sealing trials, with control measures for opencast and underground operations.
What this report foundNo standard technique for predicting, controlling or extinguishing spontaneous combustion emerged, and the methods in use proved expensive and not routinely...
R1500,00
No standard technique for predicting, controlling or extinguishing spontaneous combustion emerged, and the methods in use proved expensive and not routinely successful. Because every mine differs, the work sets out a sequence of locating the fire, assessing the risk, choosing a strategy and method, then monitoring it. Separate control measures are given for old workings, exposed coal and spoil heaps.
R1500,00
Upgrading of coal fines with a Centrifugal Concentrator
Bench and pilot testing of four centrifugal concentrator models on fine coal from two collieries, with operating variables that resisted correlation flagged for further work. For plant metallurgists.
What this report foundFour centrifugal concentrators all cut ash in fine coal, with desliming the decisive step.
R1500,00
Four centrifugal concentrators all cut ash in fine coal, with desliming the decisive step. The best unit took ash from 35.2% to 18.47% and sulphur from 0.68% to 0.36% in a single stage, raising calorific value from 23.78 to 26.16 MJ/kg. Pilot work reached 19% ash on thickener underflow and reconstituted spiral feed.